Springy Rest MICRO-ADJUST SS
Springy Rest MICRO-ADJUST SS
If you want additional springs with this order - CLICK HERE.
The Stainless Steel Micro Rest is Here. Now in Bright Silver
Springy Set up!
The springy arrow rest is pretty simple.
Standard Springy....Screw in the base/rod. Screw a spring on it. Adjust center shot and tighten the base/rod with the hex nut..
Micro Adjust body tighten by adjusting it tight against the supplied washer.. Do not over tighten as you can break it.. If you need more or less left - right adjustment either take out a washer or add a washer to help adjust the center shot. .
Adjust it so that the center of your arrow is in the center of the coil resting on the arm.. Shoot some arrows and check alignment with target...adjust left or right to get the arrow hitting down the middle.. If you have a nock high or low adjust your nocking point to get it flat..
The best archers usually had a paper tear of about 1/4 inch at 11:00 o'clock and shot from 6 to 10 feet.
Most archers buy two or three different sizes of springs and then shoot one for a week or so.. Then change to another spring weight and shoot it for a week or so. You will find that one setup works perfectly for you and you also will find that a buddy will shoot a different weight springy even though you both have the same weight bow, same arrow size, and length. It just happens.
If you want additional springy coils with this order - CLICK HERE.
Please Read "Springy Arrow Rest - Rules of Thumb"
We want to keep it simple and save our customers money. Pat makes a small recommendation...Get 3 or 4 buddies to co-op your order by adding their archer needs and save shipping costs.